TP-LINK TL-WR710N Guia do Utilizador descarregar pdf (Página 135)

TL-WR710N 150Mbps Wireless N Mini Pocket Router - Advanced Edition

- 121 -

¾ Start IP Address - Specify an IP address for the DHCP Server to start with when assigning

IP addresses. 192.168.0.100 is the default start address.

¾ End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP

addresses. 192.168.0.199 is the default end address.

¾ Address Lease Time - The Address Lease Time is the amount of time a network user will

be allowed connection to the Router with their current dynamic IP Address. Enter the

amount of time in minutes and the user will be "leased" this dynamic IP Address. After the

time is up, the user will be automatically assigned a new dynamic IP address. The range of

the time is 1 ~ 2880 minutes. The default value is 120 minutes.

¾ Default Gateway (Optional) - It is suggested to input the IP address of the LAN port of the

Router. The default value is 192.168.0.254.

¾ Default Domain (Optional) - Input the domain name of your network.

¾ Primary DNS - (Optional) Input the DNS IP address provided by your ISP or consult your

ISP.

¾ Secondary DNS (Optional) - Input the IP address of another DNS server if your ISP

provides two DNS servers.

)

Note:

1. To use the DHCP server function of the Router, you must configure all computers on the LAN

as "Obtain an IP Address automatically".

2. When you choose the Smart IP (DHCP) mode in Network → LAN, the DHCP Server

function will be disabled. You will see the page as below.

Figure 5-20 DHCP Settings

5.8.2 DHCP Client List

Choose menu “DHCP → DHCP Clients List”, and then you can view the information about the

clients attached to the Router in the screen as shown in Figure 5-21.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 283 284

Sem comentários

TP-LINK TL-WR710N Guia do Utilizador Página 135