Tp-link TL-WR941ND Manual do Utilizador

TL-WR941N TL-WR941ND Wireless N Router Rev: 2.0.0 1910010246

TL-WR941N/TL-WR941ND Wireless N Router -3- Wireless N Router without any explanation. ) Note: The two devices of TL-WR941N and TL-WR941ND are shari

TL-WR941N/TL-WR941ND Wireless N Router -93- Appendix B: Configuring the PCs In this section, we’ll introduce how to install and configure the TCP/I

TL-WR941N/TL-WR941ND Wireless N Router -94- Figure B-2 5) The following TCP/IP Properties window will display and the IP Address tab is open on th

TL-WR941N/TL-WR941ND Wireless N Router -95- Figure B-3 ¾ Setting IP address manually 1 Select Use the following IP address radio button. And the

TL-WR941N/TL-WR941ND Wireless N Router -96- Figure B-4

TL-WR941N/TL-WR941ND Wireless N Router -97- Appendix C: Specifications General Standards IEEE 802.3, 802.3u, 802.11b, 802.11g and 802.11n Protocol

TL-WR941N/TL-WR941ND Wireless N Router -98- Appendix D: Glossary ¾ 802.11n - 802.11n builds upon previous 802.11 standards by adding MIMO (multipl

TL-WR941N/TL-WR941ND Wireless N Router -99- identifying a wireless local area network. For the wireless devices in a network to communicate with ea

TL-WR941N/TL-WR941ND Wireless N Router -4- 1.4 Panel Layout 1.4.1 The Front Panel Figure 1-1 Front Panel sketch The Router’s LEDs and the QSS

TL-WR941N/TL-WR941ND Wireless N Router -5- 1.4.2 The Rear Panel Figure 1-2 Rear Panel sketch The following parts are located on the rear panel

TL-WR941N/TL-WR941ND Wireless N Router -6- Chapter 2. Connecting the Router 2.1 System Requirements ¾ Broadband Internet Access Service (DSL/Cabl

TL-WR941N/TL-WR941ND Wireless N Router -7- electrical outlet. The Router will start to work automatically. 7. Power on your PC and Cable/DSL Modem

TL-WR941N/TL-WR941ND Wireless N Router -8- Chapter 3. Quick Installation Guide This chapter will show you how to configure the basic functions of y

TL-WR941N/TL-WR941ND Wireless N Router -9- Figure 3-1 Success result of Ping command ¾ If the result displayed is similar to the Figure 3-2, i

TL-WR941N/TL-WR941ND Wireless N Router -10- 2. Is the TCP/IP configuration for your PC correct? ) Note: If the Router's IP address is 192.168

TL-WR941N/TL-WR941ND Wireless N Router -11- Figure 3-5 Quick Setup 3. Click Next, and then WAN Connection Type page will appear, shown in Figur

TL-WR941N/TL-WR941ND Wireless N Router -12- ¾ User Name and Password - Enter the User Name and Password provided by your ISP. These fields are cas

I COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Othe

TL-WR941N/TL-WR941ND Wireless N Router -13- Figure 3-9 Quick Setup – Wireless ¾ Wireless Radio - Enable or disable the wireless radio choosing

TL-WR941N/TL-WR941ND Wireless N Router -14- recommended strongly that you choose one of following options to enable security. ¾ WPA-PSK/WPA2-PSK -

TL-WR941N/TL-WR941ND Wireless N Router -15- Chapter 4. Configuring the Router This chapter will show each Web page's key functions and the con

TL-WR941N/TL-WR941ND Wireless N Router -16- Figure 4-1 Router Status 4.3 Quick Setup Please refer to Section 3.2: "Quick Installation Gui

TL-WR941N/TL-WR941ND Wireless N Router -17- Figure 4-2 QSS ¾ QSS Status - Enable or disable the QSS function here. ¾ Current PIN - The curr

TL-WR941N/TL-WR941ND Wireless N Router -18- Step 3: Wait for a while until the next screen appears. Click Finish to complete the QSS configuration

TL-WR941N/TL-WR941ND Wireless N Router -19- The QSS Configuration Screen of Wireless Adapter Step 3: Wait for a while until the next screen appears

TL-WR941N/TL-WR941ND Wireless N Router -20- The QSS Configuration Screen of Wireless Adapter Step 4: Wait for a while until the next screen appea

TL-WR941N/TL-WR941ND Wireless N Router -21- then the following screen will appear. Step 2: Choose Enter the new device's PIN and enter the P

TL-WR941N/TL-WR941ND Wireless N Router -22- the Router into the field behind Access Point PIN. Then click Next. The QSS Configuration Screen of Wi

II FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This

TL-WR941N/TL-WR941ND Wireless N Router -23- 4.5 Network Figure 4-4 the Network menu There are three submenus under the Network menu (shown in Fi

TL-WR941N/TL-WR941ND Wireless N Router -24- 1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the Router will automatic

TL-WR941N/TL-WR941ND Wireless N Router -25- 2. If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS setting, select Sta

TL-WR941N/TL-WR941ND Wireless N Router -26- Figure 4-8 WAN - PPPoE ¾ User Name/Password - Enter the User Name and Password provided by your IS

TL-WR941N/TL-WR941ND Wireless N Router -27- ¾ Time-based Connecting - The connection will only be established in the period from the start time to

TL-WR941N/TL-WR941ND Wireless N Router -28- ¾ Detect Online Interval - The Router will detect Access Concentrator online at every interval. The de

TL-WR941N/TL-WR941ND Wireless N Router -29- VIC / TAS / WA / SA / NT - vic.bigpond.net.au QLD - qld.bigpond.net.au ¾ MTU Size - The normal MTU (Ma

TL-WR941N/TL-WR941ND Wireless N Router -30- Figure 4-11 L2TP Settings ¾ User Name/Password - Enter the User Name and Password provided by your I

TL-WR941N/TL-WR941ND Wireless N Router -31- ¾ Connect Manually - You can configure the Router to make it connect or disconnect manually. After a s

TL-WR941N/TL-WR941ND Wireless N Router -32- ¾ Dynamic IP/ Static IP - Choose either as you are given by your ISP and enter the ISP’s IP address or

TP-LINK TECHNOLOGIES CO., LTD TP-LINK TECHNOLOGIES CO., LTD. South Building, No.5 Keyuan Road, Central Zone, Science & Technology Park, Nanshan,

TL-WR941N/TL-WR941ND Wireless N Router -33- The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one of these pr

TL-WR941N/TL-WR941ND Wireless N Router -34- any of them, and you will be able to configure the corresponding function. 4.6.1 Wireless Settings C

TL-WR941N/TL-WR941ND Wireless N Router -35- ¾ Channel - This field determines which operating frequency will be used. The default channel is set t

TL-WR941N/TL-WR941ND Wireless N Router -36- Figure 4-16 ¾ Disable Security - If you do not want to use wireless security, select this check box

TL-WR941N/TL-WR941ND Wireless N Router -37- • Type - you can choose the type for the WEP security on the pull-down list. The default setting is Au

TL-WR941N/TL-WR941ND Wireless N Router -38- • Radius Server IP - Enter the IP address of the Radius Server. • Radius Port - Enter the port that r

TL-WR941N/TL-WR941ND Wireless N Router -39- Figure 4-20 Wireless MAC address Filtering To filter wireless users by MAC Address, click Enable. T

TL-WR941N/TL-WR941ND Wireless N Router -40- To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want

TL-WR941N/TL-WR941ND Wireless N Router -41- Figure 4-22 Wireless Advanced ¾ Transmit Power - Here you can specify the transmit power of Router. Y

TL-WR941N/TL-WR941ND Wireless N Router -42- ¾ Enable Short GI - This function is recommended for it will increase the data capacity by reducing th

TL-WR941N/TL-WR941ND Wireless N Router I CONTENTS Package Contents ...

TL-WR941N/TL-WR941ND Wireless N Router -43- 4.7 DHCP Figure 4-24 The DHCP menu There are three submenus under the DHCP menu (shown in Figure 4

TL-WR941N/TL-WR941ND Wireless N Router -44- addresses. 192.168.1.199 is the default end address. ¾ Address Lease Time - The Address Lease Time is

TL-WR941N/TL-WR941ND Wireless N Router -45- You cannot change any of the values on this page. To update this page and to show the current attached

TL-WR941N/TL-WR941ND Wireless N Router -46- To modify or delete an existing entry: 1. Click the Modify in the entry you want to modify. If you want

TL-WR941N/TL-WR941ND Wireless N Router -47- Figure 4-30 Virtual Servers ¾ Service Port - The numbers of External Ports. You can type a service

TL-WR941N/TL-WR941ND Wireless N Router -48- ) Note: If your computer or server has more than one type of available service, please select another s

TL-WR941N/TL-WR941ND Wireless N Router -49- entry in the Port Triggering table, and associates them with the local host. 3. When necessary the e

TL-WR941N/TL-WR941ND Wireless N Router -50- Figure 4-33 Add or Modify a Triggering Entry To modify or delete an existing entry: 1. Click the Mo

TL-WR941N/TL-WR941ND Wireless N Router -51- Figure 4-34 DMZ To assign a computer or server to be a DMZ server: 1. Click the Enable radio button

TL-WR941N/TL-WR941ND Wireless N Router -52- • App Description -The description provided by the application in the UPnP request • External Port -

TL-WR941N/TL-WR941ND Wireless N Router II 4.6.5 Wireless Statistics...

TL-WR941N/TL-WR941ND Wireless N Router -53- Figure 4-37 Basic Security ¾ Firewall - A firewall protects your network from the outside world. Her

TL-WR941N/TL-WR941ND Wireless N Router -54- ¾ ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG allows customized Netw

TL-WR941N/TL-WR941ND Wireless N Router -55- UDP Flood and ICMP-Flood. ¾ DoS Protection - Denial of Service protection. Check the Enable or Disable

TL-WR941N/TL-WR941ND Wireless N Router -56- Figure 4-39 Local Management By default, the radio button “All the PCs on the LAN are allowed to acces

TL-WR941N/TL-WR941ND Wireless N Router -57- function in the screen as shown in Figure 4-40. This feature allows you to manage your Router from a re

TL-WR941N/TL-WR941ND Wireless N Router -58- Figure 4-41 Parental Control Settings ¾ Parental Control - Check Enable if you want this function t

TL-WR941N/TL-WR941ND Wireless N Router -59- 6. In the Status field, you can select Enabled or Disabled to enable or disable your entry. 7. Click t

TL-WR941N/TL-WR941ND Wireless N Router -60- 3. Click “Parental Control” menu on the left to go back to the Add or Modify Parental Control Entry pag

TL-WR941N/TL-WR941ND Wireless N Router -61- Figure 4-45 Access Control Rule Management ¾ Enable Internet Access Control - Select the check box

TL-WR941N/TL-WR941ND Wireless N Router -62- 6. In the Action field, select Deny or Allow. 7. In the Status field, select Enabled or Disabled to ena

TL-WR941N/TL-WR941ND Wireless N Router III 4.15.3 No-ip.com DDNS ...

TL-WR941N/TL-WR941ND Wireless N Router -63- 4. Click “Access Control → Rule” in the left to return to the Access Control Rule Management page. Sele

TL-WR941N/TL-WR941ND Wireless N Router -64- 2) In LAN IP Address field, enter the IP address. z If you select MAC Address, the screen shown is Fig

TL-WR941N/TL-WR941ND Wireless N Router -65- 4.11.3 Target Choose menu “Access Control → Target”, you can view and set a Target list in the screen

TL-WR941N/TL-WR941ND Wireless N Router -66- Click the Next button to go to the next page, or click the Previous button return to the previous page.

TL-WR941N/TL-WR941ND Wireless N Router -67- 4.11.4 Schedule Choose menu “Access Control → Schedule”, you can view and set a Schedule list in the

TL-WR941N/TL-WR941ND Wireless N Router -68- Figure 4-54 Advanced Schedule Settings For example: If you desire to restrict the internet activiti

TL-WR941N/TL-WR941ND Wireless N Router -69- Figure 4-55 Static Routing To add static routing entries: 1. Click Add New… shown in Figure 4-55, you

TL-WR941N/TL-WR941ND Wireless N Router -70- Click the Disable All button to disable all the entries. Click the Delete All button to delete all the

TL-WR941N/TL-WR941ND Wireless N Router -71- Figure 4-59 Bandwidth Control Rules List ¾ Description - This is the information about the rules such

TL-WR941N/TL-WR941ND Wireless N Router -72- 4.14 IP & MAC Binding Setting Figure 4-61 the IP & MAC Binding menu There are two submenus und

TL-WR941N/TL-WR941ND Wireless N Router -1- Package Contents The following items should be found in your package: ¾ TL-WR941N/TL-WR941ND Wireless N

TL-WR941N/TL-WR941ND Wireless N Router -73- Figure 4-63 IP & MAC Binding Setting (Add & Modify) To add IP & MAC Binding entries, fo

TL-WR941N/TL-WR941ND Wireless N Router -74- the ARP list also. This page displays the ARP List; it shows all the existing IP & MAC Binding entr

TL-WR941N/TL-WR941ND Wireless N Router -75- 4.15.1 Comexe.cn DDNS If the dynamic DNS Service Provider you select is www.comexe.cn, the page will ap

TL-WR941N/TL-WR941ND Wireless N Router -76- Figure 4-67 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: 1. Type the Use

TL-WR941N/TL-WR941ND Wireless N Router -77- Figure 4-68 No-ip.com DDNS Settings To set up for DDNS, follow these instructions: 1. Type the User Na

TL-WR941N/TL-WR941ND Wireless N Router -78- Password, System Log and Statistics. Click any of them, and you will be able to configure the correspon

TL-WR941N/TL-WR941ND Wireless N Router -79- 3. The router will obtain GMT automatically from Internet if it has already connected to Internet. 4.1

TL-WR941N/TL-WR941ND Wireless N Router -80- ¾ Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is no reply in the s

TL-WR941N/TL-WR941ND Wireless N Router -81- 2. Type the path and file name of the update file into the File field. Or click the Browse button to l

TL-WR941N/TL-WR941ND Wireless N Router -82- Figure 4-75 Backup & Restore Configuration ¾ Click the Backup button to save all configuration

TL-WR941N/TL-WR941ND Wireless N Router -2- Chapter 1. Introduction Thank you for choosing the TL-WR941N/TL-WR941ND Wireless N Router. 1.1 Overview

TL-WR941N/TL-WR941ND Wireless N Router -83- 4.16.7 Password Choose menu “System Tools → Password”, you can change the factory default user name an

TL-WR941N/TL-WR941ND Wireless N Router -84- Figure 4-78 System Log ¾ Auto Mail Feature - Indicates whether auto mail feature is enabled or not.

TL-WR941N/TL-WR941ND Wireless N Router -85- Figure 4-79 Mail Account Settings z From - Your mail box address. The Router would connect it to sen

TL-WR941N/TL-WR941ND Wireless N Router -86- ¾ Save Log - Click to save all the logs in a txt file. ¾ Mail Log - Click to send an email of curre

TL-WR941N/TL-WR941ND Wireless N Router -87- PacketsThe total amount of packets received and transmitted in the last Packets Statistic interval seco

TL-WR941N/TL-WR941ND Wireless N Router -88- Appendix A: FAQ 1. How do I configure the Router to access Internet by ADSL users? 1) First, configur

TL-WR941N/TL-WR941ND Wireless N Router -89- 1) Login to the Router, click the “Network” menu on the left of your browser, and click "WAN"

TL-WR941N/TL-WR941ND Wireless N Router -90- Figure A-5 Add or Modify a Virtual server Entry ) Note: Your opposite side should call your WAN IP

TL-WR941N/TL-WR941ND Wireless N Router -91- Figure A-7 Basic Security 4. I want to build a WEB Server on the LAN, what should I do? 1) Because

TL-WR941N/TL-WR941ND Wireless N Router -92- field of the Web browser. 3) Log in to the Router, click the “Forwarding” menu on the left of your bro