TP-LINK TL-SG2210P Guia do Utilizador descarregar pdf (Página 118)

107

Example

Specify the interval-time as 50 seconds:

TL-SG2424(config)# loopback-detection interval 50

loopback-detection recovery-time

Description

The loopback-detection recovery-time command is used to configure the

time after which the blocked port would automatically recover to normal status.

Syntax

loopback-detection recovery-time recovery-time

Parameter

recovery-time —— The time after which the blocked port would automatically

recover to normal status, and the loopback detection would restart. It is integral

times of detection interval, ranging from 1 to 100 and the default value is 3.

Command Mode

Global Configuration Mode

Example

Configure the recovery-time as 3 times of detection interval:

TL-SG2424(config)# loopback-detection recovery-time 3

loopback-detection(interface)

Description

The loopback-detection command is used to enable the loopback detection

function of the specified port. To disable it, please use no loopback-detection

command.

Syntax

loopback-detection

no loopback-detection

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 198 199

Sem comentários

TP-LINK TL-SG2210P Guia do Utilizador Página 118