TP-LINK TL-SG2210P Guia do Utilizador descarregar pdf (Página 42)

Command Mode

Global Configuration Mode

Example

Configure the LACP system priority as 1024 globally:

TL-SG2424(config)# lacp system-priority 1024

lacp port-priority

Description

The lacp port-priority command is used to configure the LACP port priority for

specified ports. To return to the default configurations, please use no lacp

port-priority command.

Syntax

lacp port-priority pri

no lacp port-priority

Parameter

pri —— The port priority, ranging from 0 to 65535. It is 32768 by default.

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Configure the LACP port priority as 1024 for ports 1-3:

TL-SG2424(config)# interface range gigabitEthernet 1/0/1-3

TL-SG2424(config-if-range)# lacp port-priority 1024

Configure the LACP port priority as 2048 for port 4:

TL-SG2424(config)# interface gigabitEthernet 1/0/4

TL-SG2424(config-if)# lacp port-priority 2048

show etherchannel

Description

The show etherchannel command is used to display the EtherChannel

information.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 198 199

Sem comentários

TP-LINK TL-SG2210P Guia do Utilizador Página 42