TP-LINK TL-SG5428 Guia do Utilizador descarregar pdf (Página 138)

125

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Disable port 3:

TL-SG5428(config)# interface gigabitEthernet 1/0/3

TL-SG5428(config-if)# shutdown

flow-control

Description

The flow-control command is used to enable the flow-control function for a port.

To disable the flow-control function for this corresponding port, please use no

flow-control command. With the flow-control function enabled, the Ingress

Rate and Egress Rate can be synchronized to avoid packet loss in the network.

Syntax

flow-control

no flow-control

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Enable the flow-control function for port 3:

TL-SG5428(config)# interface gigabitEthernet 1/0/3

TL-SG5428(config-if)# flow-control

media-type

Description

The media-type command is used to configure the media type of Combo port.

For a Combo port, the media type should be configured before you set its speed

and mode. This command does not apply to TL-SG5428 since TL-SG5428 has

no Combo port.

Syntax

media-type [ rj45 | sfp ]

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 238 239

Sem comentários

TP-LINK TL-SG5428 Guia do Utilizador Página 138