TP-LINK TL-SG5428 Guia do Utilizador descarregar pdf (Página 140)

127

Syntax

speed { 10 | 100 | 1000 | auto }

no speed

Parameter

10 | 100 | 1000 | auto —— The speed mode of the Ethernet port. There are

four options: 10Mbps, 100Mbps, 1000Mbps and Auto negotiation mode

(default).

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Configure the Speed Mode as 100Mbps for port 3:

TL-SG5428(config)# interface gigabitEthernet 1/0/3

TL-SG5428(config-if)# speed 100

storm-control broadcast

Description

The storm-control broadcast command is used to enable the broadcast

control function. To disable the broadcast control function, please use no

storm-control broadcast command. Broadcast control function allows the

switch to filter broadcast in the network. If the transmission rate of the broadcast

packets exceeds the set bandwidth in the storm-control rate

, the packets will

be automatically discarded to avoid network broadcast storm.

Syntax

storm-control broadcast

no storm-control broadcast

Command Mode

Interface Configuration Mode (interface gigabitEthernet / interface range

gigabitEthernet)

Example

Enable the broadcast control function for port 5:

TL-SG5428(config)# interface gigabitEthernet 1/0/5

TL-SG5428(config-if)# storm-control broadcast

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 238 239

Sem comentários

TP-LINK TL-SG5428 Guia do Utilizador Página 140