TP-LINK TL-SG5428 Guia do Utilizador descarregar pdf (Página 224)

211

Chapter 30 LLDP Commands

LLDP function enables network devices to advertise their own device information periodically to

neighbors on the same LAN. The information of the LLDP devices in the LAN can be stored by its

neighbor in a standard MIB, so it is possible for the information to be accessed by a Network

Management System (NMS) such as SNMP.

lldp

Description

The lldp command is used to enable LLDP function. To disable the LLDP

function, please use no lldp command.

Syntax

lldp

no lldp

Command Mode

Global Configuration Mode

Example

Enable LLDP function globally:

TL-SG5428(config)# lldp

lldp hold-multiplier

Description

The lldp hold-multiplier command is used to configure the Hold Multiplier

parameter. The aging time of the local information in the neighbor device is

determined by the actual TTL value used in the sending LLDPDU. TTL = Hold

Multiplier * Transmit Interval. To return to the default configuration, please use

no lldp hold-multiplier command.

Syntax

lldp hold-multiplier multiplier

no lldp hold-multiplier

1 2 ... 219 220 221 222 223 224 225 226 227 228 229 ... 238 239

Sem comentários

TP-LINK TL-SG5428 Guia do Utilizador Página 224